Intelligent Transmitters and Depth Sensors

Paroscientific Intelligent Transmitters consist of a Digiquartz® Pressure Transducer and a digital interface board in an integral package. Commands and data requests are sent via two-way RS-232 or RS-485 serial interfaces. Digital outputs are provided directly in engineering units with typical accuracy of 0.01% over a wide temperature range. Output pressure is fully thermally compensated using a quartz crystal temperature signal. All intelligent transmitters are preprogrammed with calibration coefficients for full plug-in interchangeability.

Intelligent Transmitters are available in 19 absolute pressure ranges from 15 psia (0.10 MPa) to 40000 psia (276 MPa), 6 gauge pressure ranges from 15 psig to 200 psig, and differential pressure ranges of 3, 6, and 18 psid. Dual RS-232 and RS-485 interfaces allow complete remote configuration and control of all operating parameters, including resolution, sample rate, choice of engineering units, integration time, and sampling requests. Commands include: Single sample and send, synchronized sample and hold, continuous sample and send, and special burst sampling modes.  

New and enhanced features include support for both serial loop and multi-drop networking, selectable baud rates up to 115,200 baud, synchronization of measurements with time-based integration, 2 or 4 wire RS-485 transmission distances greater than 1 kilometer, improved high-speed continuous pressure measurements, a power management “sleep” mode, data formatting features, and unit identification commands. 
Series 1000 Transmitters
  • Absolute Pressure Ranges from 15 psia to 10000 psia
  • Gauge Pressure Ranges from 15 psig to 200 psig
  • Differential Pressure Ranges 0 to 3, 0 to 6, 0 to 18 psid
Series 6000 Transmitters
  • Absolute Pressure Ranges from 15 psia to 500 psia
  • Gauge Pressure Ranges from 15 psig to 200 psig
Series 9000 Transmitters
  • Absolute Pressure Ranges from 1000 psia to 40000 psia
Series 8000-I  Intelligent depth sensors
  • Depth Ranges from 10 to 7000 meters
Model 715 - 2 line LCD display
  • Directly compatible with all new Intelligent Transmitters and Depth Sensors
  • The backlit 2 line display presents pressure values, engineering units, user defined text messages, etc. in a clear easy to read format.
  • Easy connection to Transmitters, computers, data loggers or other serial hosts.

All transmitters come with free Digiquartz® Software allowing the choice of engineering units, resolution, update times, sampling commands, plotting and logging functions, etc.
  Series 1000

Series 1000
  • 15 Absolute Pressure Ranges (15 to 10000 psia)
  • 6 Gauge Pressure Ranges (15 to 200 psig)
  • 3 Differential Pressure Ranges (0 to 3, 0 to 6, 0 to 18 psid)
  • Integral Microprocessor Electronics
  • Digiquartz® Transducer with Integral Shock Mount
  • Fully Temperature Compensated and Linearized Outputs
  • Dual RS-232 & RS-485 Serial Interfaces
  • User Selectable Parameters include Resolution, Update Rate, Engineering Units, Sampling Commands, etc. with the Supplied Software
  • Directly Compatible with Model 715 Display
  • Click here for a summary of the electronic features 
  • Free zero adjustment
  • Click here for data sheet

  Series 6000

Series 6000
  • 10 Low Pressure Absolute Ranges (15 to 500 psia)
  • 6 Gauge Ranges (15 to 200 psig)
  • Miniaturized Integral Microprocessor Electronics
  • Digiquartz®  Transducer with Integral Shock Mount
  • Fully Temperature Compensated and Linearized Outputs
  • Dual RS-232 & RS-485 Serial Interfaces
  • User Selectable Parameters include Resolution, Update Rate, Engineering Units, Sampling Commands, etc. with the Supplied Software
  • Directly Compatible with Model 715 Display
  • Free zero adjustment
  • Click here for a summary of the electronic features 
  • Click here for data sheet

  Series 9000

Series 9000

 
  • 9 High Pressure Absolute Ranges (1000 to 40000 psia)
  • Miniaturized Integral Microprocessor Electronics
  • Digiquartz® Transducer with Integral Shock Mount
  • Fully Temperature Compensated and Linearized Outputs
  • Dual RS-232 & RS-485 Serial Interfaces
  • User Selectable Parameters include Resolution, Update Rate, Engineering Units, Sampling Commands, etc. with the Supplied Software
  • Directly Compatible with Model 715 Display
  • Click here for a summary of the electronic features 
  • Click here for data sheet
Series 8000-I   Depth Sensors
  • 0.01% Accuracy
  • 0.0001% Resolution
  • Submersible Waterproof Housings
  • Power management "sleep" mode
  • Integral Microprocessor Electronics
  • Digiquartz® Transducer with Integral Shock Mount
  • Fully Temperature Compensated and Linearized Outputs
  • Dual RS-232 & RS-485 Serial Interfaces
  • RS-485 transmission distance greater than 1 kilometer
  • User Selectable Parameters include Resolution, Update Rate, Engineering Units, Sampling Commands, etc. with the Supplied Software
  • Directly Compatible with Model 715 Display
  • Free zero adjustment
  • Click here for a summary of the electronic features 
  • Click here for data sheet
Model 715 - 2 line LCD Display

Model 710 Display

The Model 715 displays pressure and temperature data from all Paroscientific Intelligent Transmitters that have Dual RS-232 and RS-485 interfaces. The two line, 16 character, alphanumeric, backlit, liquid crystal display is set up with transmitter commands and included software. Display functions include pressure and temperature values with engineering units, overpressure warning, tare indicator, user defined text messages, and a horizontal analog bar graph showing percentage of full-scale pressure.

The Model 715 will respond to display commands from the Transmitter, a computer, or other serial host on either the RS-232 or RS-485 port. For stand-alone operation, it can display data whenever power is applied to the transmitter.

Set-up and data acquisition software are included at no extra charge.
Click here for additional product information.

  Related Links